Frequently Asked Questions
Choose a topic and a question.
- BOATS
- MANUFACTURING
- ORDERING
- SEAARK
How can I find out the interior floor space of my boat?
View our interior dimensions chart.
How do I order a cover for my boat?
We offer Trans Shield Covers for the majority of our models. You can purchase one through your dealer at any time.
How should I clean my boat’s upholstery?
See chart for common stains and steps to treat them. After all cleaning methods, rinse well with water.
| Stains | Step 1 | Step 2 | Step 3 |
|---|---|---|---|
| Chewing Gum | D | A | D then A |
| Engine Oil | B | B | B |
| Spray Paint | C | B | B |
| Mildew or wet leaves* | D | B | A |
| Oil baed paint (fresh) | D | B | |
| Oil based paint (dried) | A | B | |
| Suntan lotion* | D | B | |
| Grease | D | B |
Use the chart above to clean common stains with:
- (A) Medium-soft brush, warm, soapy water/rinse/dry
- (B) Meguir’s Vinyl & Rubber Cleaner/Conditioner #57
- (C) One (1) tablespoon ammonia, ¼ cup hydrogen peroxide, ¾ cup water, rinse/dry
- (D) Wipe or scrape off excess (chill gum with ice)
*Suntan lotion, wet leaves and some other products contain dyes that may stain permanently.
How should I clean my boat?
The paint finish on your boat provides beauty, depth of color, gloss retention and durability.
To best way to preserve your boat’s finish is to keep it clean by washing it often with lukewarm or cold water. Try to avoid washing your boat in the direct rays of the sun. Don’t use strong soaps or chemical detergents. Use liquid hand, dish, or car washing soaps. All cleaning agents should be flushed promptly and not allowed to dry on the surface or they could stain. Dry the finish with a soft clean chamois or 100% cotton towel to avoid surface scratches and water spotting.
Never use the following to clean your boat:
- Gasoline
- Acetone
- Paint thinner
- Turpentine
- Lacquer thinner
- Nail Polish Remover
- Alcohol
- Laundry Soap
- Bleach
- Reducing Agents
Occasional waxing or mild polishing of your boat by hand may be necessary to remove residue from the paint finish. Always use waxes and polishes that are non-abrasive and made for automotive type finishes.
Foreign materials such as calcium chloride and other salts, ice melting agents, road oil, tar, tree sap, bird droppings, chemicals from industrial chimneys, etc. can damage your boat’s finish if they remain on the painted surface. Wash the boat as soon as possible. If necessary, use non-abrasive cleaners that are marked safe for painted surfaces to remove the foreign matter.
Exterior painted surfaces are subject to aging, weather, water pollutants and chemical fallout that can take their toll over a period of time. You can help to keep the paint finish looking new by keeping the boat garaged, covered and avoiding extended stays in water whenever possible.
What is the suggested maintenance of the Gator Hide interior?
To properly maintain your Gator Hide Interior make sure to be cautious when loading object with sharp points or edges, too much pressure may cause damage. To clean the liner, use a mild detergent and warm water. DO NOT use products containing wax, silicone or bleach.
Will you sell the Amped Package separate?
No. The Amped Package must be ordered with the boat. It can not be sold after a boat is built and parts can not be purchased separately.
What boats are available with the Amped Package?
You can upgrade the ProCat 200, ProCat 240, Easy 200, Big Easy, EasyCat, SL Easy.
Can any boat be upgraded?
All of our boats have the option to be upgraded. It depends on which model chosen the number of upgrades available. Some of our higher end models already come with most features standard unlike our jon boats which are able to have more things added.
Why should I choose an aluminum boat over fiberglass?
There are many different reasons, but the primary reason is durability. Aluminum boats are built to last longer, require less maintenance and are more forgiving when it comes to scrapes and bumps. Aluminum is also easier and cheaper to repair if there ever is any damage.
What does NMMA certified mean?
This means that we go above and beyond the standard Coast Guard ratings that are required. The National Marine Manufacturers Association creates stricter rules and regulations for boat manufacturers to create a safer more durable boat. Many companies are not a part of the NMMA and are using lower standards.
Can I put a higher HP on my boat than what is recommended?
No. The recommended HP is calculated due to the boats dimensions, weight of the engine and weight capacity of the boat. Over powering a boat can lead to performance problems and even loss of insurance.
Where do I weld the pods on?
If pods are being added after the production of the boat, view our weld guide.
What does NMMA certified mean?
This means that we go above and beyond the standard Coast Guard ratings that are required. The National Marine Manufacturers Association creates stricter rules and regulations for boat manufacturers to create a safer more durable boat. Many companies are not a part of the NMMA and are using lower standards.
Is there any wood in the boat?
No wood is used in the manufacturing of a SeaArk. We use a composite plastic in our transoms and all aluminum floors, the two most common places for wood use.
What grade aluminum is used?
We use 50/52 grade aluminum in all of our products.
Can I order directly from the factory?
No. We only sell through our authorized dealers. Find a dealer.
Can any boat be upgraded?
All of our boats have the option to be upgraded. It depends on which model chosen the number of upgrades available. Some of our higher end models already come with most features standard unlike our jon boats which are able to have more things added.
Will you build me a custom boat?
To an extent. We are considered semi-custom due to the availability of hulls that we offer and our amount of options and accessories. This combination creates the opportunity to plan a boat that fits a variety of needs. However, we do not build custom boats based on personal drawings or specifications.
How do I order a SeaArk boat?
You can order through any of our authorized dealers across the US. Find a dealer.
Can I order parts?
You can order parts from any of our authorized dealers. The items can be drop-shipped directly to your location. Find a dealer.
Can I order current decals?
You can order decals from any of our authorized dealers. The items can be drop-shipped directly to your location. Find a dealer.
Did SeaArk Boats buy MonArk Boats?
The McClendon family started the MonArk Boat line in the 1950’s and continued building through the mid 80’s. The decision was made to sell the entire product line, name, and specs in its entirety in 1988. The current company SeaArk Boats has no records of any of the MonArk Boat line. As of now, there is no forwarding company, and we are not certain who holds the previous records for the MonArk Boat line.
Where are you located?
We’re proudly located in Monticello, AR.
Do you offer tours?
Yes! You can view our facilities any time Monday – Friday 8am – 5pm. Please call before arrival so that we can have someone ready to guide you.
I have a SeaArk Marine boat, can you help?
Unfortunately, no.
SeaArk Marine was a sister company to SeaArk Boats that built larger vessels for government and military use. They are no longer building boats. There is now a different company that handles SeaArk Marine’s parts and service. Their contact information is as follows:
Virginia Electronic Systems
Phone: 800-776-6996
Email: SeaArkparts@boatguys.org